The Recall Desk

Recalls

All US Product Recalls

Searchable archive of product recalls from the FDA, USDA FSIS, CPSC, NHTSA, and EPA — translated into plain English, severity-scored from objective criteria, and always linked back to the original government notice.

How to read this listing

Every recall on this list has been scored 1–5 against an objective rubric from the agency’s own classification, presence of reported injuries or deaths, distribution scope, and hazard type. The colored severity badge on each card is the score — 5 (Critical) means deaths or serious injuries are reported, 4 (Severe) means significant injury or hospitalization risk, and 3 (High) means a known hazard with no confirmed harm yet. Filter to 3+ (High and above) if you want to skip routine Class-III notices.

The agency chips above control which streams are visible. FDA spans food, drugs, and medical devices. USDA FSIS is meat, poultry, and processed egg products. CPSC is household consumer products. NHTSA is vehicles, tires, and child seats. Nationwide on a card means the recall affects every US state — most do — while a state list means distribution was limited.

Click any recall to see the full summary, affected lot codes and model numbers, the agency’s own classification, and a direct link back to the original government notice for verification.

Filters

Agency

Category

Minimum severity

Clear filters

11376–11400 of 27718

  • HighFDA (Devices)·Z-2497-2024·2024-08-14

    BD PYXIS MEDBANK Medication Cabinet Software Issue Causes Incorrect Bin Labels

    CareFusion is recalling BD PYXIS MEDBANK medication dispensing cabinets due to a software issue that causes incorrect bin information to print on restock labels, potentially leading to medication selection errors.

    Product
    BD PYXIS MEDBANK TWR MN CR-6HH-1FH-3FM-P, REF: 169-92 containing software version 3.9.1.9
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2512-2024·2024-08-14

    Baxter Precision Surgical Table Recall: Loose Spring Pins Risk

    Baxter Healthcare Corporation is recalling the PST 500 U Precision Surgical Table due to loose spring pins that can cause the tabletop to unexpectedly tilt or move, potentially causing unintended patient movement during surgery.

    Product
    Baxter PST 500 U, Precision Surgical Table, Part number (product code) 4080300
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2474-2024·2024-08-14

    SIGNA MR380 MRI system software may exceed implant heating limits

    GE SIGNA MR380 MRI systems with software versions SV25.5 or SV25.6 may exceed radiofrequency heating limits during certain imaging sequences, potentially causing MR-conditional implants to overheat. The issue occurs in Low SAR Mode when specific T2 FLAIR sequences are used with the Optimized T2 FLAIR option disabled.

    Product
    SIGNA MR380, with affected software versions: SV25.5, SV25.6; Nuclear Magnetic Resonance Imaging System
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-2518-2024·2024-08-14

    Gyn Laparoscopy Kits Recalled Due to Inadequate Sterilization Process

    American Contract Systems is recalling 29 gynecological laparoscopy surgical kits due to insufficient aeration during sterilization, which may compromise sterility and increase infection risk for patients.

    Product
    American Contract Systems Gyn Laparoscopy convenience kit
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2469-2024·2024-08-14

    GE SIGNA Artist MR system may overheat implants in certain sequences

    GE Medical Systems is recalling SIGNA Artist MR imaging systems because they may produce radiofrequency power exceeding user-set limits when using certain imaging sequences in Low SAR Mode, potentially causing MR-conditional implants to overheat.

    Product
    SIGNA Artist, with affected software versions: DV26.0, DV27.1, DV28.1, DV29.1, MR30.0, MR30.1; Nuclear Magnetic Resonance Imaging System
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-2536-2024·2024-08-14

    Steris Hookup Model 2-8-540 Documentation Error Risks Improper Endoscope Disinfection

    Steris Hookup Model 2-8-540 instructions were incorrectly documented, potentially preventing proper endoscope disinfection and risking patient infection.

    Product
    Hookup Model/Catalog Number: 2-8-540 Product Description: Hookups provide the interface between an Advantage Plus" Automated Endoscope Reprocessor and Advantage Plus" Pass-Thru Automated Endoscope Reprocessor ( AER ) and endoscopes, which allow perfusion of liquids dispensed
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2503-2024·2024-08-14

    BD PYXIS Automated Dispensing Cabinet Software Issue Causes Incorrect Medication Bin Labels

    A software issue in BD PYXIS automated dispensing cabinets may cause incorrect medication bin labels to print during restocking, potentially leading to medication dispensing errors. CareFusion is recalling 16 units.

    Product
    BD PYXIS MEDBANK TWR MN CR-8HH-3FM-P, REF: 169-99 containing software version 3.9.1.9
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2463-2024·2024-08-14

    GE SIGNA HDxt 3.0T MRI systems may overheat implanted devices

    GE Medical Systems is recalling 3.0T SIGNA HDxt MRI systems because radiofrequency energy can exceed safety limits under specific operating conditions, potentially overheating implanted medical devices in patients.

    Product
    3.0T SIGNA HDxt Family, with affected software versions: RX27.0 to RX27.3, RX28.0, RX29.0 to RX29.2, MR30.0, MR30.1HD16.0_V03, HD23.0_V03; Nuclear Magnetic Resonance Imaging System
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-2527-2024·2024-08-14

    Medical X-ray display system support arm may lower unexpectedly

    Siemens LUMINOS Lotus Max X-ray displays are being recalled because the support arm may lower unintentionally, potentially injuring people nearby during positioning.

    Product
    LUMINOS Lotus Max -Intended to visualize anatomical structures by converting an x-ray pattern into a visible image Model Number: 11574100
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2483-2024·2024-08-14

    MRI System Software Error Can Overheat Patient Implants

    GE Medical Systems recalled three SIGNA 7.0T MRI systems due to a software error that can exceed preset safety limits during imaging, potentially overheating implants in patients under certain conditions.

    Product
    SIGNA 7.0T, with affected software versions: 7T29.1, MR30.1; Nuclear Magnetic Resonance Imaging System
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-2492-2024·2024-08-14

    Automated Medication Cabinet Software Bug May Print Wrong Bin Labels

    CareFusion's BD PYXIS MEDBANK medication dispensing cabinets (software 3.9.1.9) have a software defect that may cause restock labels to print incorrect medication bin locations, creating a risk of medication dispensing errors.

    Product
    BD PYXIS MEDBANK TWR MN CR-14HH-P, REF: 169-86 containing software version 3.9.1.9
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2531-2024·2024-08-14

    Pulmonary Heart Valve Grafts Recalled Due to Invalid Test Results

    Artivion is recalling two CryoValve SG heart valve grafts that were approved and implanted with invalid test results.

    Product
    CryoValve SG Pulmonary Human Heart Valve, SGPV00, Cryopreserved Decellularized Heart Valve Allograft Prepared with SynerGraft (SG) Technology.
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2462-2024·2024-08-14

    GE SIGNA Premier MRI system software overheating risk to implants

    GE Medical Systems is recalling 404 SIGNA Premier MRI systems worldwide due to a software issue where radiofrequency energy can exceed prescribed safety limits during specific imaging sequences, potentially overheating MR-conditional implants.

    Product
    SIGNA Premier, with affected software versions: RX27.0 to RX27.3, RX28.0, RX29.0 to RX29.2, MR30.0, MR30.1; Nuclear Magnetic Resonance Imaging System
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-2530-2024·2024-08-14

    Baxter SIGMA Spectrum Infusion Pump recall due to inadequate pre-release testing

    Baxter Healthcare is recalling the SIGMA Spectrum Infusion Pump (Serial 2158913) distributed nationwide in Florida. The recall is due to improperly performed testing procedures prior to release, which may affect device function.

    Product
    Baxter SIGMA Spectrum Infusion Pump, Product Code: 35700BAX2
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Food)·F-1644-2024·2024-08-14

    Aldi Mixed Sourdough Loaf Recalled for Potential Plastic Contamination

    Izzio Artisan Bakery is recalling 9500 cases of Aldi Mixed Sourdough loaves due to potential plastic contamination. The affected products were distributed across seven states: Illinois, Michigan, Texas, Ohio, New Jersey, Florida, and Arizona.

    Product
    Aldi Mixed Sourdough loaf. A single 24oz loaf packaged into plastic bag, 12 loaves per case.
    Category
    Food
    Distribution
    7 states
  • HighFDA (Devices)·Z-2471-2024·2024-08-14

    GE SIGNA 1.5T MR Systems May Overheat Implants in Low SAR Mode

    GE Medical Systems recalled 2,146 SIGNA 1.5T MR systems that may overheat implants during certain imaging sequences in Low SAR mode due to a software defect in radiofrequency safety calculations.

    Product
    1.5T SIGNA HDxt Family, with affected software versions: HD16.0_V03 to HD16.4, HD23.0_V03, HD28.0, HD29.1, MR30.0, MR30.1; Nuclear Magnetic Resonance Imaging System
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-2490-2024·2024-08-14

    BD PYXIS automated medication cabinet software defect causes incorrect bin labels

    A software defect in BD PYXIS MEDBANK automated medication dispensing cabinets may cause the incorrect medication bin to be printed on restock labels, potentially resulting in medication errors.

    Product
    BD PYXIS MEDBANK TWR MN CR-12HH-1FH, REF: 169-84 containing software version 3.9.1.9
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2515-2024·2024-08-14

    Centurion Procedure Kits with Defective Syringes Recalled Worldwide

    Medline Industries is recalling Centurion procedure kits due to defective plastic syringes affected by an FDA safety alert. The syringes may leak or break and pose a potential risk to patient health.

    Product
    Centurion procedure kits labeled as NEURO ANGIO PACK, Pack Number DYNDA1431A
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-2502-2024·2024-08-14

    Automated Dispensing Cabinet Software Issue Causing Incorrect Medication Bin Labels

    A software defect in the BD PYXIS MEDBANK automated dispensing cabinet causes incorrect medication bin locations to be printed on restock labels, potentially resulting in medication dispensing errors. No illnesses or injuries have been reported.

    Product
    BD PYXIS MEDBANK TWR MN CR-8HH-3FH-P, REF: 169-98 containing software version 3.9.1.9
    Category
    Medical Device
    Distribution
    Distributed nationwide
  • HighFDA (Devices)·Z-2464-2024·2024-08-14

    GE Discovery MR750 MRI System Software May Cause Implant Overheating

    GE HealthCare is recalling certain MR750 MRI systems with specific software versions. When using particular imaging sequences in Low SAR Mode without the Optimized T2 FLAIR option, the radiofrequency field can exceed safe limits, risking overheating of MR-conditional implants.

    Product
    Discovery MR750 3.0T, with affected software versions: DV24.0, DV25.0, DV25.1, DV26.0 to DV26.4, DV29.1, MR30.0, MR30.1; Nuclear Magnetic Resonance Imaging System
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Devices)·Z-2516-2024·2024-08-14

    Medline Centurion Procedure Kits Recalled for Syringe Leaks, Breakage, and Quality Defects

    Medline has recalled Centurion procedure kits containing syringes affected by an FDA safety alert. The syringes may leak, break, or have other quality defects, posing a risk to patient health.

    Product
    Centurion procedure kits labeled as: 1) CVC INSERT BUNDLE 16CM, Pack Number ECVC3260; 2) CVC DOUBLE LUMEN 16CM, Pack Number ECVC8105
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Food)·F-1650-2024·2024-08-14

    Premo Turkey & Swiss 6oz Deli Meat Recalled for Potential Salmonella

    Lipari Foods is recalling Premo Turkey & Swiss 6oz deli meat packages due to potential Salmonella contamination. No illnesses have been reported.

    Product
    Premo Turkey & Swiss 6oz, clear plastic, UPC 612510001042, 4 retail packages per wholesale case
    Category
    Food
    Distribution
    16 states
  • HighFDA (Devices)·Z-2470-2024·2024-08-14

    GE SIGNA Voyager MRI systems risk implant overheating under specific configurations

    GE SIGNA Voyager MRI systems may exceed prescribed radiofrequency limits under specific operating conditions, risking overheating of MR conditional implants. The issue occurs with certain imaging sequences when the Optimized T2 FLAIR option is disabled.

    Product
    SIGNA Voyager, with affected software versions: PX26.0 to PX26.6, VX28.0, VX29.1, VX29.2, MR30.0, MR30.1; Nuclear Magnetic Resonance Imaging System
    Category
    Medical Device
    Distribution
    0 states
  • HighFDA (Food)·F-1649-2024·2024-08-14

    Premo Meat Lovers Recall Due to Potential Salmonella Contamination

    Premo Meat Lovers 7oz packages are being recalled due to potential Salmonella contamination. Affected products have a Best By Date of 7/13/24 and Lot Code 25202406.

    Product
    Premo Meat Lovers 7oz, clear plastic, UPC 612510093832, 4 retail packages per wholesale case
    Category
    Food
    Distribution
    16 states
  • HighFDA (Devices)·Z-2525-2024·2024-08-14

    Siemens x-ray display system support arm may lower unexpectedly

    Siemens Luminos Agile Max x-ray imaging systems have a support arm that may unintentionally lower during display positioning, creating an injury risk.

    Product
    Luminos Agile Max -Intended to visualize anatomical structures by converting an x-ray pattern into a visible image. Model Number: 10762472
    Category
    Medical Device
    Distribution
    Distributed nationwide