Vehicle
23 recalls affect this vehicle. Sorted by severity, then date.
PACCAR is recalling 2025 Kenworth and Peterbilt trucks due to improperly heat-treated ball studs in steering assemblies that may break, causing loss of steering control.
PACCAR is recalling 2023-2024 Peterbilt 579 trucks because the parking brake module may fail to engage, creating a vehicle rollaway and crash risk.
PACCAR is recalling approximately 908 Peterbilt and Kenworth commercial trucks from 2019-2022 for a brake defect that may cause unintended vehicle movement during winching operations. Software updates will be provided free of charge.
PACCAR is recalling certain 2021-2022 Peterbilt commercial trucks due to insufficient clearance in the Hill Start Assist valve assembly, which may damage the rear brake hose and disable rear braking. Dealers will inspect and repair the assembly free of charge.
PACCAR is recalling certain 2021 Peterbilt 348 and 579 vehicles due to brake chamber defects. Incorrectly assembled springs may cause pressure loss and increase crash risk.
PACCAR is recalling 2024–2026 Kenworth and Peterbilt trucks. A software fault may prevent tail brake lights, headlights, reverse lights, and turn signals from illuminating properly, and may cause lift axles to unexpectedly raise or oscillate.
Pending LLM rewrite. Source: NHTSA 25V181000.
Pending LLM rewrite. Source: NHTSA 24V233000.
Pending LLM rewrite. Source: NHTSA 24V044000.
Pending LLM rewrite. Source: NHTSA 24V789000.
Pending LLM rewrite. Source: NHTSA 24V190000.
PACCAR is recalling 2021-2024 Peterbilt 567 and 579 trucks. U-bolts securing the air tank can contact and wear through the fuel tank over time. A punctured tank can leak fuel, increasing the risk of fire.
PACCAR is recalling 2021-2025 Kenworth and Peterbilt commercial trucks with defective electronic control units that may fail due to electrical interference, potentially disabling critical safety systems including ABS, traction control, and electronic stability control.
PACCAR Incorporated is recalling certain 2022–2023 Peterbilt and Kenworth commercial trucks due to incorrectly assembled steering gears that may fracture. A fractured steering gear can cause loss of steering control, increasing crash risk.
PACCAR is recalling approximately 46 Peterbilt 579 (2022-2023) and Kenworth T680 (2023) vehicles with faulty electronic stability control software that may underestimate vehicle mass, reducing crash prevention performance. Dealers will provide a free software update.
PACCAR is recalling 2021-2023 Peterbilt 579 trucks with MX-13 engines because an improperly installed fastener can chafe the alternator cable, increasing fire risk.
Bolts securing the chassis fairing step assembly on certain 2022 Peterbilt 579 vehicles may loosen and fracture. This can cause the step to move unexpectedly while entering or exiting the cab, increasing the risk of injury.
PACCAR is recalling approximately 1,107 Kenworth and Peterbilt commercial trucks (2016–2022) due to methane detection system power loss. If the system loses electrical power, operators may not detect dangerous methane levels, increasing fire and injury risk.
PACCAR is recalling certain 2022-2023 Kenworth and Peterbilt trucks whose digital displays may freeze. A frozen display prevents critical safety information like vehicle speed and warning lights from appearing.
PACCAR Incorporated is recalling certain 2023 Kenworth and Peterbilt commercial trucks because the engine control module may short-circuit, causing the engine to stall unexpectedly. An engine stall while driving increases the risk of a crash.
PACCAR is recalling certain 2022–2023 Peterbilt 579 vehicles because the molded hood mirror assemblies may break at the pivot joint and fall into the roadway, creating a road hazard.
PACCAR is recalling certain 2021-2022 Kenworth and Peterbilt heavy trucks equipped with Cummins X15 engines. The flywheel attachment capscrews may be improperly torqued, risking flywheel detachment and loss of drive power.
PACCAR is recalling 2022 Peterbilt 567 and 579 vehicles because the Electronic Stability Control malfunction indicator lamp may not illuminate, leaving drivers potentially unaware of ESC failures that could increase crash risk.